LED Signal Lighting Units For Main Signal

Efftronics LED Signals are designed for use in Multi Aspect Signaling schemes for Main Line. Signals are available in 110V AC, 125mm Diameter.

Features

• Interchangeable with Standard filament Color Light bulb Signals suitable for RE and Non RE Areas.
• High efficiency AllnGaP & InGaN LEDs, 40 - 100 viewing Angle with 600 meters visibility.
• Constant uniform intensity over wide input voltage range typically 82 to 150 Volts.
• Chromaticity as per BS 1376 Standard.
• High Strength hermitically sealed units made in ABS material for better immunity.
• Color coding of Shells as per Aspect color to prevent incorrect replacement of units.
• Health monitoring to indicate the status of the lit aspect.
• MIL grade connectors used for interconnection for better reliability.

Design Compliance:

• Product Compliance: Research Design Standards Organization. RDSO/SPN 153/2004 Rev3.0 (Draft)
• Environmental: IS: 9000 (relevant clauses)
• Ingress Protection: IP 54
• Chromaticity: RED, GREEN Class ‘C’ of BS 1376; YELLOW Class ‘B’ of BS 1376
• Safety: EN50129, EN50126, SIL-4

Operating Specifications:

• Operating Temperature: -10°C to +70°C
• Operating Voltage: 110V + 25%
• Operating Current: 140 mA+ 10% -15% (rms)
• AC Immunity: > 60V AC

Lamp Proving:

Compatible with traditional Lamp proving circuits and can also be made compatible with specific requirements.

Product Specification

Type	Aspect Color	Dominant Wave Length	No. of LEDs	Nominal Intensity	Intensity Range	Viewing Angles (50% peak intensity)
Main	RED	630 nm	84	150 Lux	135 Lux - 210 Lux	5° deg H/V
Main	YELLOW	595 nm	84	175 Lux	157.5 Lux - 245 Lux	6° deg H/V
Main	GREEN	505 nm	32	150 Lux	135 Lux - 210 Lux	8° deg H/V

LED Lighting Units Dispersion

Lighting Units Dimensions