Efftronics

LED Signal Lamps

Home > Products > LED Signal Lamps

LED Signal Lamps

LED signal Lamps are designed to meet the requirements of Railway signaling systems. LED signals are high safety, low maintenance solutions to the age-old reliability problems afflicting incandescent lamps. LED units accept wide voltage range and provide constant brightness over it.

Salient Features

Multiple high efficiency LED’s with parallel circuitry leads exceptional reliability.
Self contained hermitically sealed unit with high strength UV stabilized polycarbonate Reflector.
Chromaticity is as per BS1376 standards.
Visibility over 600meters with viewing angle of 8 degree.
The current Regulator powering the lamp operates on a wide range of input supply from 82.5 to 137.5.
Intelligent Health Monitoring unit to indicate the status of the aspect in the control room.
Audio visual alarm unit to alert maintainer about failure.
SIL4 compliance product.
Fail safety validation as per CENELEC standards EN50126 & EN 50129.
Low life cost and long service life.
Low power consumption

Applications:
Railway signaling applications

Technical Specifications:
LED Lamp

Colour

Red / Yellow / Green

Organization

Multiple Arrays in random matrix

Excitation

From current regulator

Illumination

150/175/150 lux at 1.5m

Colour co-ordinates

Red/Green

Class "C" of BS 1376-1974

Yellow

Class "B" of BS 1376-1974

Red/Green	:	Class "C" of BS 1376-1974
Yellow	:	Class "B" of BS 1376-1974

Retro-fit to existing GLS signals

Breakdown voltage 2 kV AC (rms) for 1 minute

Insulation Resistance >100 MW @ 500V

Dispersion angle

4 to 8 degrees

Operating temperature

-10 to +60oC

Current regulator

Auto sensing of Lamp color

Input

110V ± 25% AC/DC

Input current

Led Signal Lamps Led Signal Lamps AC - 140 mA (rms) +10%,-20%

DC - 125 mA + 10%,-15%

Output

Regulated current

No. of Arrays

Output regulation over operating range < 2%

Noise immunity

60V AC

AC immunity in DC mode

300V

Breakdown voltage 2 kV AC (rms) for 1 minute

Insulation Resistance >100 MW @ 500V

Operating temperature

-10 to +60 oC

Health Monitoring Cum Alarm Unit

MAIN INPUT	:	110 V AC, Single Phase, 50 Hz
AUX INPUT	:	24 V DC
INPUT VARITION	:	+/- 20%
OPERATING TEMP.	:	-10 Degree C To 60 Degree C (RH Up to 90%)
ASPECT OK	:	100%lux to >50%lux illumination
ASPECT DIM	:	<50%illumination to >40%illumination
ASPECT FAIL	:	< 40lux illumination OR ECR dropping treated as fault condition.
INDICATION	:	Audiovisual alarm with audio silence is provided. Visual indication for aspect fail, dim and ok is provided.

* Remote audiovisual alarm unit provided with reset switch.

* Sensing on the same connection wires.


	Sales Team

	Training Team

	Technical Support